Bonde à pression sans trop-plein

Our shower trays are made from exactly the same material as our baths — our proprietary Omnigel built-up system, handmade here in Britain. It's a multi-layer construction with a hard-wearing, hand-polished surface over a strong, rigid structural body, giving you a tray that's beautifully finished, genuinely durable and built to last.

Because it's the same Omnigel system, your tray shares all the advantages of an Omnitub bath: it can be made in any colour — with the colour running all the way through the material rather than sitting on the surface — it has a non-slip surface as standard, and it's covered by our 30-year warranty.

The result is a shower tray that looks immaculate, feels reassuringly solid underfoot, and is made to perform for decades. And if you'd like it to match your bath or your wider bathroom scheme, just let us know — we make them in any colour you like.

Almost always, yes — and it's one of the best things about an Omnitub. Because it's far lighter than a traditional cast-iron or stone bath, it can be carried tilted or turned on its side during installation, so the measurement that really matters is the tub's depth rather than its full width. That means most of our baths pass comfortably through a standard interior doorway, even when the bath is wider than the door opening.

The key thing is to check the narrowest point along the whole route — the doorway itself, but also any tight hallway turns, stair landings or low ceilings. If the narrowest point is clear, you're good to go.

Not sure? Our "Will it fit?" checker makes it effortless — just snap a photo of your door or hallway and it'll estimate the clearance and tell you exactly which Omnitubs can pass through. And you're always welcome to send us your measurements and we'll happily confirm it for you.

Yes — that's the typical way an Omnitub is fitted. Your installer builds a simple supporting frame or plinth to the right height, and the bath sits neatly within it, ready to be tiled or panelled around for a clean, built-in finish. Because an Omnitub is far lighter than a cast-iron or stone bath, it's much easier to position and level during this stage.

If you'd prefer a freestanding look, every one of our non-seated tubs comes with a feet kit as standard, so you can stand it on its feet instead. Our seated tubs are designed to be built in and don't include feet, as they're made to sit within a supporting frame.

Whichever route you take, we're always happy to talk your fitter through the best approach for your specific bath and bathroom.

Our 1500 round seated soaking tub is £3,295 in our standard white, or £3,645 in any colour from our full range. The colour is a single flat price whatever shade you choose — matched and run right through the Omnigel, not painted on — so a bold colour costs no more than a subtle one. You'll always find the current price, and can choose your finish, on its product page.

Colour is a fixed addition to the white price, shown on the product page as you select it:

• Baths, shower trays and basins: +£350
• Bath panels: +£300

Your colour is made to a RAL reference (or matched from a sample for shades outside the standard ranges) and carried right through the Omnigel, so it's permanent and consistent for life.

Delivery works exactly as it does for a white Omnitub — you simply add 14 working days for the colour to be made. At checkout you can:

• choose any delivery date that suits you, now or in the future, at no extra cost; or
• place your order on hold and confirm your delivery date later, when you're ready.

You're never tied to a fixed timescale — order whenever you like and take delivery exactly when it suits your project. The only difference from a white tub is the 14 working days we need to create your colour.

Every Omnitub is handmade in Britain from Omnigel — our own proprietary built-up material system, developed specifically for deep, comfortable soaking baths that last a lifetime.

Rather than being formed in one thin layer like a standard acrylic or pressed-steel bath, an Omnitub is built up through multiple bonded layers: a hard-wearing, hand-polished surface over a strong, rigid structural body. It's a 7-layer built-up system as standard — and up to 13 layers with our insulation upgrade — and that construction is what gives an Omnitub its standout qualities:

• Warm to the touch, and excellent at holding the heat of your soak
• Strong and rigid underfoot, yet a fraction of the weight of cast iron or stone
• Colour right through the material — never a surface coating — so it won't chip or wear away to reveal anything beneath
• Backed by our 30-year warranty

You can see the full story of how Omnigel is built up, layer by layer, on our Omnigel page — and whatever size or colour you choose, it's made from exactly the same premium material throughout.