Order Helpline +44 1934 751200

September Sale 5% off everything · add a waste 14% · add a panel 19% · the full set 24% · whirlpools 10% Shop the sale →

Your Order

Track your order
+44 1934 751200

The more you complete, the more you save

Every Omnitub & shower tray5% OFF
Omnitub + waste14% OFF
Omnitub shower tray + waste14% OFF
Omnitub, waste + panel19% OFF
The complete bathroom24% OFF

Offer ends 30 September, 23:59

Full details of the offer →
Save the offer to your email — we’ll keep your parts on file
Saved — we’ll keep your parts on file.
That didn’t send — please check the address and try again.
Commercial · Wellness & spa · Made in Britain

Tubs for spas, bathhouses and wellness centres

Seated, multi-person and plunge tubs for the hot-and-cold circuit — handmade in Somerset in Omnigel, coloured to the room and built into stone, tile or timber with you.

  • Made in Britain
  • Handmade in Somerset
  • 30-year warranty on the shell
  • Any size, any colour
Handmadein Somerset, England
Since 2005one workshop, our own moulds
30-yearwarranty on every bath and tray shell
Any colourcast through the Omnigel, never painted
Worldwidedelivery, door to door
Who this is for

For spas, bathhouses, sauna clubs and wellness centres

A wellness floor pairs heat with cold — sauna, steam, then a plunge — and the tubs sit at the centre of it. They are also what guests touch and photograph, so they have to belong to the room.

  • Seated and social: seated tubs are 1000 mm deep with a built-in seat; the multi-person range seats two, three or four bathers.
  • Hot, cold or contrast: the same Omnigel shell runs either way. The plant decides the temperature — OmniSoak recommends a cooling and heating unit from our Avantopool partnership, sized to the tub.
  • Holding temperature: the insulated build bonds PIR board into the shell — 25, 50, 75, 100, 120 or 150 mm, 50 mm as standard — over-laminates it and seals it with Omnicoat, so the tub is one continuous shell with no thermal bridging.
  • Colour: any of over 2,000 RAL colours, BS 4800 or a sample you send — cast through the Omnigel, never painted. Whirlpool baths have a smaller colour range.
How we work with a spa

The tub as part of the architecture

01

Hot, cold or both

One handmade shell, run hot or cold by the plant you pair it with — and insulated so it holds either temperature.

02

Coloured to the room

Any RAL colour cast through the Omnigel, with Omnitone colour-matched wastes to finish the tub in the same colour.

03

Set into the floor

Deck-set into stone, tile, micro-cement or timber — the lip of the tub becomes the edge of the floor.

04

Matched across a floor

Six tubs or sixteen, each built to the same signed drawing so the run matches in size, colour and drilling.

Projects in this sector

Wellness floors we have built for

Project 01

A heat-and-cold wellness floor

Six matte-black 1100×600 seated tubs as the cold side of a floor of saunas, a steam room and relaxation benching.

Partner
C11 Recovery
Sector
Wellness & spa · Recovery & ice
Location
Ireland

On C11 Recovery’s wellness floor the Omnitubs are the cold half of the circuit. Guests move from the heat rooms — blonde cedar, a stacked-log wall, colour-LED — and a domed steam room in burnt-orange tile, to six 1100×600 matte-black tubs deck-set into honed travertine.

Each tub was handmade in Somerset to one drawing, so all six match. Only the black lip of the Omnigel shows above the stone, and the tubs sit in the floor as part of the architecture.

  • 6 ×1100×600 seated tubs
  • Travertinedeck-set into honed stone
  • Matte blackcolour cast through the Omnigel
  • Heat + coldsaunas · steam · plunge
Matte-black plunge tubs set into travertine, beside the glass-brick drum
A run of black Omnitub plunge tubs under wall-lights
The wellness floor — feature drum, benching, tiled walls
Black plunge tub in the burnt-orange tiled experience room
Deck-set black tubs under a soft wall-wash
Plunge tubs along the glass-brick wall
The lit drum — feature entrance to the heat rooms
Blonde cedar sauna with a cool LED floor line
The domed, burnt-orange tiled steam room
Tiered blonde relaxation benching
Warm overview across the heat-experience floor
Black tub lip on honed stone — the Omnigel edge
Questions

Spa and wellness questions

Can the same spa tub run hot and cold?

Yes — the Omnigel shell is the same either way; the plant sets the temperature. OmniSoak recommends a cooling and heating unit from our Avantopool partnership sized to the tub’s water, and the insulated build holds the temperature in both directions.

Which Omnitubs seat more than one bather?

The 1500 × 700 two-person seated tub, the 1500 × 1500 and 1800 × 1800 multi-person tubs and the 1500 mm diameter round tub, all 1000 mm deep, plus the 3000 × 2000 step-entry plunge and soaking tub.

What warranty does a spa whirlpool carry?

On orders placed from 2024 the Omnigel shell of a whirlpool carries a 30-year warranty, the same as every bath shell. The whirlpool system — pump, blower, control, jets and pipework — carries 5 years. Consumer Rights Act rights apply on top.

Can the tubs be matched to our interior scheme?

Baths are made in any of over 2,000 RAL colours, BS 4800, or matched to a sample, with the colour running through the Omnigel rather than painted on. Omnitone colour-matched wastes are available to finish them. Whirlpool baths have a smaller colour range.

Start a project

Designing a spa or wellness floor?

Tell us the circuit — how many tubs, hot or cold, how many bathers each, and how they are set into the floor — with drawings or photographs of the space. The workshop that will build them prices it.

Fitting for a private client in their own home? That is a trade account. Prefer to talk it through first? Talk With Us.

Verified reviews

Real customers, real soaks

Independent reviews from people who actually own an Omnitub. Verified by Trustpilot.

Provenance

Verified Made in Britain

Never imported. Every Omnitub is hand-built in Somerset by our own craftsmen — from the Omnigel layup to the final coat. No outsourced moulds, no badge-engineering, no shortcuts.

  • Handmade in Somerset Every tub layered, finished and shipped from Unit 5 Batch Business Park, Lympsham — never outsourced.
  • Never imported No re-badged moulds, no white-labelled product. Every Omnitub starts and ends its journey on British soil.
  • 30-year warranty Backed by the longest manufacturer warranty in the deep-soaking bath category — only possible because we build it ourselves.
View Certificate of Manufacture
Chat with Omnitub