Order Helpline +44 1934 751200

Your Order

Track your order
+44 1934 751200
Bespoke · made to order

Ice baths & cold plunge tubs, made to your size

Bespoke cold plunge and ice baths, handmade to order in our Somerset workshop — any size, single or commercial multi-person, indoor or outdoor, in any colour you can name. Our built-up Omnigel system is naturally insulating, so it holds the cold for longer.

Handmade Omnitub ice bath
Finished in any RAL colour — or matched to your own paint sample
Garden plunge Omnitub ice bath
Garden plunge
Sunken in a deck Omnitub ice bath
Sunken in a deck
Commercial studio Omnitub ice bath
Commercial studio
Home Spa Insulated Omnitub ice bath
Home Spa Insulated

A few of our standard sizes — or tell us yours. Browse standard ice baths →

Bespoke ice baths and cold plunge tubs, handmade to order in Somerset — built to your own size for home, gym, studio, spa or clinic. Tell us your dimensions in the form above and we'll reply with your quotation by email and WhatsApp within 24 hours.

Made for cold therapy

Single plunge tubs, seated cold plunges and commercial multi-person systems — any length, width and internal depth, indoor or outdoor. Our built-up Omnigel system is naturally insulating rather than conductive, so it is not cold-shock harsh to climb into and it holds the cold for longer. For outdoor installations and demanding commercial use, ask about our insulation upgrade.

Built around your setup

Plumb it for a chiller, filtration or a sanitation system, add steps, seats, a fitted lid, or your waste and overflow exactly where you need them. Choose a polished high-gloss or matte finish, in any colour matched to BS 4800, RAL, Pantone or a paint sample — colour that runs right through the surface and is repairable for life.

Single, or by the dozen

One plunge for your own garden room, or a full run for a gym group or hotel spa — same material, same hands, same standard. Tell us how many you need and we will quote the lot.

How to start

Fill in the form above with your size, finish and where it will be used — attach a drawing or photo if you have one. Prefer to talk it through? WhatsApp us or call 01934 751200.

Good to know

Bespoke ice baths — your questions

Can you make an ice bath to my own size?
Yes. Every bespoke Omnitub ice bath is made to order by hand in Somerset to your own length, width and depth — single plunge, seated, or commercial multi-person. Send your size for a quotation within 24 hours.
Does it hold the cold?
Our built-up Omnigel system is naturally insulating rather than conductive, so it is not cold-shock harsh to get into and it holds the cold for longer. An insulation upgrade is available for outdoor and demanding commercial use.
Can it be installed outdoors or for commercial use?
Yes — indoor, outdoor or commercial. We can plumb it for a chiller, filtration and a sanitation system, and add steps, seats or a fitted lid.
Can I order several for a gym or spa?
Yes. From one plunge for a garden room to a full run for a gym group or hotel spa — same material, same hands, same standard. Tell us how many and we will quote the lot.
Your quotation

Request your bespoke quotation

Tell us the size, how many you need, and your finish — we’ll reply with your quotation by email and WhatsApp within 24 hours, maximum.

Before you start

What the bespoke bench is taking on

We run one bespoke project at a time, so we are selective about what goes on the bench. Right now these are the pieces we are building:

  • DepthBespoke sizes that match the depth of our existing range — 600 mm.
  • SeatedSeated plunge tubs matching our existing seated range.
  • CharacterGenuine one-offs — round, or a real piece of design.
  • QuantityA run for a gym, spa or studio opens any depth — tell us how many.

A single one-off shallower than our existing range is not what the bespoke bench is building at the moment. Our standard ice baths are deep by design — the same 600 mm, made to order by hand in Somerset in any RAL colour, with the colour running right through the Omnigel. Browse standard ice baths →

Your details
Your size

Two heights, and they’re easy to mix up — here’s the plain version:

  • Internal soaking depth — how deep the water sits inside, measured from the floor of the tub up to the overflow. This is the number that decides how deep your soak feels.
  • Overall height — the total height of the tub on the outside, floor to rim. This is the one that has to fit under a window or through a doorway.

Not sure of one of them? Give us your best measurement and a note in the box below — we confirm every dimension on your drawing before anything is built.

Specification

Finish

Where will it be used?

Your drawings or photos (optional)

Got a sketch, a plan, or a photo of the space? Attach it and we’ll quote from it. JPG, PNG, HEIC or PDF · up to 5 files · 15 MB each.

Anything else?
We reply by email & WhatsApp within 24 hours — maximum.

Independent reviews

Real customers, real soaks

Written by our customers and published independently on Trustpilot. The rating below updates live.

Live from Trustpilot
Provenance

Verified Made in Britain

Never imported. Every Omnitub is hand-built in Somerset by our own craftsmen — from the Omnigel layup to the final coat. No outsourced moulds, no badge-engineering, no shortcuts.

  • Handmade in Somerset Every tub layered, finished and shipped from Unit 5 Batch Business Park, Lympsham — never outsourced.
  • Never imported No re-badged moulds, no white-labelled product. Every Omnitub starts and ends its journey on British soil.
  • 30-year shell warranty On the Omnigel shell of every bath, tray, basin and whirlpool — possible because we build every one ourselves, by hand in Somerset since 2005.
View Certificate of Manufacture
Chat with Omnitub