Omnitub Panels | Omnitub
Skip to content
What Is An Omnitub?
- An Omnitub is a Handmade Deep Soaking Bath Tub
- Available In Any Colour (Brilliant White Being The Standard)
- Internal Depth Of 600mm | 60cm | 23.62in
- Fits through doorways of 630mm | 63cm | 24.80in
- Handmade In Somerset
- Worldwide Delivery
![]()
Horizontal (Flat) Sides
- There are 3 75mm Sides
- There is 1 100mm Side
- The 75mm Sides can be trimmed up to 50mm
- The 100mm Side can be trimed up to 75mm
- Installer Trims Tubs Using Grinder, Plung Saw, Circular Saw.
- Recommended to only trim when necessary
- Recommended to only trim sides going into a wall surface
Internal Finish
- Triple Layer GRP Hand Lay Application
- Brilliant White (Standard Colour)
- 130 Colours to Choose From
- Bespoke Colour Match Available
- Clean With Non Abraisive Cleaners and Cothes
- Interanal Depth of 600mm / 60cm / 23.62 in
Exterior Finish
- Unfinished Exterior
- Triple Hand Lay Fiberglass, Bonded With Resin
- Suitable for Finishing with Panels, Tiled, Microcemented, Wall Panel.
- Wear Gloves Whilst Handelling
Included Feet Kit
- For All Non Seated tubs
- Detached For Shipping
- Screw Base Foot In (Screws Provided)
- Screw Bolted Feet into Base Foot
- Adjust to get Level
- Can Cut Bolted Feet If Desired
- Regular Installed Height With Feet Between 700mm and 750mm
- Regular Installed Height Without Feet 625mm
Additional Strength
- 18mm Board Inbetween the GRP (Internal Finish) and the Fiberglass (External Finish)
- This makes an Omnitub exceptional to shower over and to walk around in
- Strong, Sturdy base with no flexing or bowing in the Omnitub
Up to 27% off
