Handmade in Somerset.
Made by people, not production lines.
Every Omnitub is built by hand in our own factory in Somerset — the mould, the build, the colour and the final polish. Nothing is imported, nothing is outsourced, and no white-labelled product ever carries our name.
Never imported
Built up by hand, as one solid whole
An Omnitub isn’t pressed from a sheet, poured, or vacuum-formed as a thin skin over a frame. It’s built up layer on layer by hand from our own material, Omnigel — up to seven layers as standard, thirteen with our insulation upgrade — and finished with our own sealed coat, Omnicoat.
A hand-laid Omnigel surface
Laid by hand for a deep, hand-polished finish that’s warm to the touch. Your colour runs right through the Omnigel itself — never painted on — so a knock never reveals another colour beneath, and the surface polishes back to new years from now.
A dense, built-up body
Built up by hand into a rigid, solid shell that gives an Omnitub its strength and its quiet feel underfoot — no flex, no drumming, no hollow ring. Reassuringly solid, at a fraction of the weight of cast iron or stone.
Sealed with Omnicoat
Omnicoat is the final coat that seals the whole build into one continuous, gap-free shell. It’s what lets every layer behave as a single unit — and it’s why an Omnitub carries a 30-year warranty as standard.
We’ve spent years perfecting that build, and we make every piece ourselves — so the exact recipe stays behind our workshop doors. What we’ll gladly tell you is everything it does for you.
Insulated by thickness — you choose how much
Insulation isn’t a tick-box on an Omnitub. You specify it by thickness, and the board is taped, bonded into the shell, built over as part of the piece and sealed under Omnicoat — so there’s no gap between insulation and tub, and no thermal bridging. The insulation performs at its full value, and the whole build behaves as one.
Thicknesses can be mixed across a single build — a heavier base under a lighter wall, for instance. It holds heat for a long, deep soak, and holds cold just as well for ice and plunge use — which is why it’s the specification behind our outdoor, commercial and cold-water installs.
Plan your thermal build in OmniSoak
Handmade here. Built into rooms everywhere.
Because every Omnitub starts as a raw, handmade piece, it can be sized, drilled, trimmed and coloured to a brief — then built into its surroundings until it’s one with the room. These are real installs, photographed as they were left.
What Made in Britain means for you
A 30-year warranty
The longest manufacturer warranty in the category — only possible because we build every piece ourselves, and can repair or replace it ourselves.
Direct from the makers
There’s no middleman and no retailer mark-up. You deal with the workshop that makes your Omnitub — since 2005, from Somerset.
Any colour, made to order
White Omnitubs are made and held in stock. Choose a colour and your Omnitub is made to order, with the colour cast through the Omnigel — over 2,000 RAL colours, under licence.
Free UK Named Day Delivery
Every Omnitub to the UK mainland is delivered free, on a day you choose — and we’ll hold your order until your bathroom is ready.
See it in Somerset
Visit our showroom in Highbridge, by appointment, to sit in an Omnitub and see the finish and colour in person.
Made by people
Every mould is handmade in our own factory, and every tub is laid, built, polished and checked by a person — not a production line.