Handmade Bespoke Bath Tubs

Bespoke Bath Tubs From Omnitub

Need a bathtub made to fit your space perfectly?

We manufacture fully bespoke bath tubs in any length, width, shape or internal depth. Whether you’re designing for a compact bathroom, a luxury spa space, or a completely unique layout, every Omnitub is handmade in Somerset to your exact specification.

Choose your dimensions, shape, colour and features, all produced to order by our team.

Most bespoke baths are ready for dispatch in 3 – 4weeks

Explore our Ready-to-Ship Deep Soaking Tubs, available in multiple sizes

Custom Designed Two Person Seated Tub

Commercial Two Person Seated System in Black With Bespoke Black Whirlpool Solution

One of one. A fully bespoke two-person whirlpool tub, built for a hotel spa — and it's one of the nicest builds we've done.

This video shows the raw product before installation. A follow-up video will be posted once it's fully installed on site.

About this build:

A hotel was developing a dedicated spa area featuring saunas, steam rooms, and treatment spaces — and they needed a two-person whirlpool solution to fit a very specific footprint. We worked directly with the architects from the brief stage to design the tub from scratch, spec the jet system, and engineer the fill and drain setup to suit a commercial environment.

Key features of this tub:

• Fully bespoke dimensions — not a standard product
• 50mm flanges on all four sides
• Extended slant-back for reclining comfort — more reclined angle than our standard seated range
• Two-person layout: individual reclined seat positions with a shared footwell in the centre
• All jets positioned on the sides only (none on the base — specified by the architects)
• Dual fill system: two jet-fill laps, one either side of the tub, for an even and consistent fill from both sides simultaneously
• Black tub with black "murdered out" jet finish throughout
• Touch controls positioned off the tub (external to the surround)
• Pumps and blowers located under the seat area for easy service access
• Greywater drain integration planned on site — water released after use and repurposed

Dimensions (approximate — verify before ordering):

Width approx. 195cm | Length approx. 195cm | Internal depth approx. 80cm total

Note: this tub will not pass through a standard single door. Double doors, or installation before walls are built, is required.

Is this relevant to your project?

If you're a designer, architect, spa operator, or property developer with a project that needs a completely bespoke solution — a tub that doesn't exist off the shelf — this is what we do. We work from your brief, your space, and your spec. Multiple quantities available for commercial orders.

We are able to create Bespoke Omnitub Sizes and completely Bespoke Baths. If we already have a size which is close to the size you require then you most likely do not need to order or discuss a “Bespoke Omnitub Size”. Instead the Omnitub which is closest to what you’re after can be trimmed by us or your installer.

Please look through the below to get a further understanding on what is possible in regards to trimming an existing Omnitub®

In the past we have created new Omnitub® sizes from customers and we’re pleased to confirm we are still offering this service. So if you are looking for something which is a different size and would like to discuss this please do feel free to reach out.

We also offer a Bespoke Service for the Hospitality Industry and the Pod Manufacturing Sector. To discuss these requirements please reach out to us on either WhatsApp us or call 01934 751200 and ask for Ollie.

All Bespoke Services are carried out in house with our own Team of skilled craftsman. We can create any length, width, depth… Anything.

To discuss an order with us please either WhatsApp us or call 01934 751200 and ask for Ollie.

From Design To Delivery

With Omnitub Bespoke, we work closely with you on every detail of your bespoke bath and keep you in the loop at every stage of production.

We offer two pricing tiers for Omnitub Bespoke;

Lower Tier

A size we will reuse within our existing ranges.

Higher Tier

A size we will never resuse within our existing ranges.

One At A Time

We only take on on bespoke project at a time so turnaround times are varied.

Some of the more complex designs have taken up to 4 weeks to complete design, pattern, master and production mould plus delivery.

Orders are taken in advance ad we can queue bespoke orders with an agreed tiumescale prior to procedding with a bespoke order.

USA Custom Designed Tub

Custom Built-In Bathtub Made to Order — 48"x48", 19" Deep, Tiled Upstand

A fully bespoke, one-of-a-kind bathtub — handmade in Somerset, England, and shipped to a customer in the US.

This build showcases just how custom we can go. Every single detail on this tub was specified by the customer, from the overall dimensions right down to the waste hole location.

Specs for this build:

• 48" x 48" square footprint
• 19" internal depth
• 2.5" flange on the accessible (open) side
• 2" upstand/flange on the three tiled sides
• Bespoke waste hole location
• Three-sided wall installation with tiled finish running straight down to the upstand — creating a completely sealed edge with no gaps

The upstand design (sometimes called a tile flange or tiled lip) is not common in the UK market but is popular in US bathroom builds. It allows finishing tiles to run cleanly and vertically down to meet the tub edge, with no exposed gap or grout line at the junction.

What makes this bespoke?

We can build in any size, any depth, any length, any width, any shape, and any color — including any RAL or BS standard. Waste hole position can go anywhere you need it. Additional features like upstands, flanges, and accessible side configurations can all be incorporated.