Hot, cold or both
One handmade shell, run hot or cold by the plant you pair it with — and insulated so it holds either temperature.
Order Helpline +44 1934 751200
Seated, multi-person and plunge tubs for the hot-and-cold circuit — handmade in Somerset in Omnigel, coloured to the room and built into stone, tile or timber with you.
A wellness floor pairs heat with cold — sauna, steam, then a plunge — and the tubs sit at the centre of it. They are also what guests touch and photograph, so they have to belong to the room.
Each card links to the live product page with its size, depth and dry weight. White is held in stock; any colour is built to order.
Two to four bathersMulti-person tubsSeated social tubs for two, three or four, 1000 mm deep.See the multi-person range →
Round · 1000 mm deep1500 Diameter Round Soaking TubA 1500 mm diameter round tub with seats — the centrepiece shape for a bathing hall.See it →
Two-person · seated1500 × 700 Two-Person Seated TubTwo seats facing along a 1500 × 700 mm footprint, 1000 mm deep.See it →
Japanese-style · 1000 mmSeated soaking tubsSingle-bather seated tubs from 1100 × 600 mm — the cold side of a contrast circuit, or a hot soak.See the seated range →
Whirlpool · multi-person1800 × 1800 Multi-Person Seated WhirlpoolThe 1800 × 1800 seated tub with a whirlpool system. Shell warranty 30 years; whirlpool system 5 years.See it →
1200 and 1500 mm deepPlunge tubsCold plunges for the end of the heat circuit.See the plunge tubs →
Planning a tub that is not in the range — a longer bench seat, a curve, a sunken pool? The bespoke bath service builds to your drawing.
One handmade shell, run hot or cold by the plant you pair it with — and insulated so it holds either temperature.
Any RAL colour cast through the Omnigel, with Omnitone colour-matched wastes to finish the tub in the same colour.
Deck-set into stone, tile, micro-cement or timber — the lip of the tub becomes the edge of the floor.
Six tubs or sixteen, each built to the same signed drawing so the run matches in size, colour and drilling.
On C11 Recovery’s wellness floor the Omnitubs are the cold half of the circuit. Guests move from the heat rooms — blonde cedar, a stacked-log wall, colour-LED — and a domed steam room in burnt-orange tile, to six 1100×600 matte-black tubs deck-set into honed travertine.
Each tub was handmade in Somerset to one drawing, so all six match. Only the black lip of the Omnigel shows above the stone, and the tubs sit in the floor as part of the architecture.
Yes — the Omnigel shell is the same either way; the plant sets the temperature. OmniSoak recommends a cooling and heating unit from our Avantopool partnership sized to the tub’s water, and the insulated build holds the temperature in both directions.
The 1500 × 700 two-person seated tub, the 1500 × 1500 and 1800 × 1800 multi-person tubs and the 1500 mm diameter round tub, all 1000 mm deep, plus the 3000 × 2000 step-entry plunge and soaking tub.
On orders placed from 2024 the Omnigel shell of a whirlpool carries a 30-year warranty, the same as every bath shell. The whirlpool system — pump, blower, control, jets and pipework — carries 5 years. Consumer Rights Act rights apply on top.
Baths are made in any of over 2,000 RAL colours, BS 4800, or matched to a sample, with the colour running through the Omnigel rather than painted on. Omnitone colour-matched wastes are available to finish them. Whirlpool baths have a smaller colour range.
Tell us the circuit — how many tubs, hot or cold, how many bathers each, and how they are set into the floor — with drawings or photographs of the space. The workshop that will build them prices it.
Fitting for a private client in their own home? That is a trade account. Prefer to talk it through first? Talk With Us.
Never imported. Every Omnitub is hand-built in Somerset by our own craftsmen — from the Omnigel layup to the final coat. No outsourced moulds, no badge-engineering, no shortcuts.