Omnitub · Additional Item

Push Down Waste With Overflow

1 6

£150.00 GBP

About this product

Description

Push Down Bath Waste & Trap — With Overflow

Push Down Bath Waste & Trap (With Overflow) | Omnitub Tested | Standard Bathroom Configuration

This push-down bath waste with integrated overflow and matching bath trap (also known internationally as a siphon) is the most commonly specified option for indoor residential bathrooms.

The overflow limits the maximum water level and safely redirects excess water back into the drainage system, reducing the risk of water spilling over the bath edge.

Supplied as a matched waste and trap system, this setup ensures correct flow, sealing, and long-term reliability — particularly important for deep, freestanding bathtubs.

Omnitub tested performance

This waste and trap combination has been tested by Omnitub across all Omnitub bath depths. Our testing confirms that the system:

Handles higher water volumes more efficiently
Performs consistently at increased bath depths
Outperforms many standard bath wastes when used with deep baths

This is why the waste and trap must be installed together to ensure compatibility and long-term performance.

Compatibility

This waste and trap set is fully compatible with all Omnitub bathtubs.

Overflow or no overflow does not affect tub selection — both options are engineered to work seamlessly across the Omnitub range.

Key features

Integrated overflow for overfill protection
Supplied with matching bath trap (siphon)
Push-down (click-clack) operation
Omnitub tested across all bath depths
Standard, installer-friendly configuration
Compatible with all Omnitub bathtubs

Soaking depth & water level guidance

On a non-seated Omnitub fitted with an overflow, the maximum water level is approximately 525mm, defined by the overflow position.

As with any bath:

User weight displaces water
Movement increases water level
Filling to the limit before entry will activate the overflow

To ensure a comfortable and controlled bathing experience, Omnitub recommends a 400mm water depth fill on non-seated bathtubs. This allows comfortable immersion while leaving sufficient space for displacement and movement.

Want maximum potential depth instead?

For projects prioritising maximum water depth, or for commercial and outdoor installations, we also offer a Push Down Bath Waste & Trap without Overflow, tested and approved for deep-soaking use.

👉 View Push Down Bath Waste & Trap (No Overflow)

Technical

Specifications

Net Weight: 2.0 kg · 4.4 lbs

Reference

Resources & downloads

Everything your plumber, installer or architect needs — datasheets, care guides, and supporting documents for this product.

Documents for this product

Cleaning & Care — Standard Finishes Cleaning & Care — Omnitone (Colour-Matched) Overflow & tap-hole drilling guide

Helpful links

Frequently askedReal answers from our customer conversations

Track your deliveryReal-time consignment timeline

Custom colour serviceBS 4800, RAL, or bespoke colour match

Talk to a craftsmanShare drawings, discuss plans on WhatsApp

Delivery

Shipping, delivery & lead times

Made in Somerset, shipped worldwide. Stocked white tubs dispatch within a day or two — coloured and bespoke builds are made to order. UK mainland delivery is free; international ships via our shipping network.

Lead times by product

White Omnitubs

Fastest

Orders placed before 10:00am — dispatched the same working day
Orders placed after 10:00am — dispatched the next working day
Delivered 2 working days after dispatch
Pick your delivery date at checkout, or hold for later

Coloured Omnitubs

Made to order

Made by hand to your colour spec — please allow 14 days production
Dispatched Monday to Friday once complete
Delivered 2 working days after dispatch
Pick your delivery date at checkout, or hold for later

Click & Collect

Somerset

Order before 10:00am for same-day collection
Order after 10:00am for next working day collection
We’ll contact you to arrange a suitable collection time
Monday to Friday · Unit 5, Batch Business Park, Lympsham BS24 0ES

Choose when you receive it

Immediate dispatch

Despatched as soon as possible — delivered on the next available date.

Scheduled delivery

Pick your preferred delivery date at checkout, at no extra cost.

Hold order

Secure your tub now and tell us when you’re ready — ideal if your installer date isn’t confirmed.

Where we ship

UK Mainland — Free

Free

Palletways kerbside delivery, inclusive of VAT. Choose your delivery date at checkout.

International — live rates

worldwide

Air or road freight worldwide. Live rates at checkout.

More information Full shipping & delivery details

Shipping & Delivery

UK Mainland delivery is free. England, Scotland, Wales and Northern Ireland — every postcode, every tub, on a named day you choose at checkout. No minimum order, no surcharges, no fine print.

International? Live rates at checkout. Add your tub to the cart, enter your delivery address, and we will quote shipping live — calculated against the actual package dimensions and your destination. There is no need to ask for a quote — the checkout does it for you in seconds.

Whether you want immediate dispatch, a future delivery date, or to hold your order entirely until your project is ready — we have an option for you. UK and international.

Your Delivery Options

Immediate Dispatch — your order ships as soon as possible and arrives on the next available delivery day. Available UK and worldwide.

Scheduled Delivery — pick a specific delivery date at checkout that suits your installer or project. Available UK and worldwide.

Hold Order — secure your tub today at the current price and tell us when you would like it delivered later. Days, weeks or months — your call. The order is locked in, production is queued, and we ship when you give us the go. Ideal if your installer date is not yet confirmed, you are waiting on bathroom works, or you simply want to take it off your list while you finalise the rest. Available UK and worldwide.

Click & Collect — collect directly from our Somerset workshop. Available Monday to Friday — we will arrange a suitable time with you.

Despatch Times by Product Type

White Omnitubs

Orders placed before 10:00am can be despatched the same working day
Orders placed after 10:00am can be despatched the next working day
Delivered 2 working days after despatch
Select your delivery date at checkout, or hold your order for a later date

Coloured Omnitubs

Made to order — please allow 14 days production time
Despatched Monday to Friday once complete
Delivered 2 working days after despatch
Select your delivery date at checkout, or hold your order for a later date

Click & Collect — Somerset Workshop

Order before 10:00am for same-day collection
Order after 10:00am for next working day collection
We'll contact you to arrange a suitable collection time
Available Monday to Friday

UK Mainland — Free Delivery

England · Scotland · Wales · Northern Ireland

Delivery to all mainland UK addresses is completely free of charge, inclusive of VAT. Your tub travels on a pallet and is delivered to your kerbside on the date you choose at checkout.

We recommend timing delivery to coincide with your installer's visit. This starts your 30-day return window from the moment the tub arrives, and means your installer can receive and position it in one visit. If your installer date isn't confirmed yet, use the Hold Order option — order now and tell us when you're ready.

Fastest Turnaround Schedule

Delivery days are Monday to Friday only, excluding public and bank holidays and the festive closure period in December. Some areas of Scotland require an additional two working days. Northern Ireland requires an additional two working days on the free delivery schedule.

Rescheduling

You can reschedule your chosen delivery date up to 7 days before the booked date. To track your delivery, use the tracking link sent at despatch — click 'Track IT' and enter your postcode and consignment number.

Kerbside Delivery

All Omnitub deliveries are kerbside. The courier is not obligated to move your tub beyond the kerbside — they may assist if asked but reserve the right to decline. Moving the tub from the kerbside to its final position is the customer's responsibility. Please ensure access is suitable for a pallet vehicle and flag any restrictions (narrow lanes, low clearance) when ordering.

48-Hour Damage Reporting Window

You have 48 hours from the delivery timestamp to report any damage. Do not accept delivery and leave the tub wrapped until installation — transit damage can only be actioned within this 48-hour window. This is standard practice for palleted goods and applies to all deliveries.

Failed & Refused Deliveries

If a delivery is refused or cannot be completed due to the customer being unavailable, a re-delivery charge applies and must be paid before goods are released. If the tub needs to be held at the local depot in the meantime, a £6 (inc. VAT) per day storage charge applies on top of any re-delivery fee. To avoid re-delivery charges entirely, the order may be collected directly from the local delivery depot.

Same address, different date: £60–£90 + VAT
Different address, same depot route: £90–£120 + VAT
Different address, different depot route: £120–£150 + VAT

Channel Islands

Jersey · Guernsey · Isle of Man

We ship to the UK Channel Islands as a chargeable service. You have two options:

Use your own Channel Island shipper. We deliver your tub to a forwarding partner on the UK mainland — this falls within our free UK mainland delivery service. You arrange the onward crossing.

We arrange the full crossing. We can price and organise shipping direct to your Channel Island address. Contact us via WhatsApp or phone and we'll get a quote across to you.

Europe & Worldwide — Live Rates at Checkout

Add your piece to the cart and enter your delivery address at checkout — we quote live shipping for your destination, to over 220 countries. Compare the options by price and speed, and check out in minutes.

Import duties and local taxes are estimated for you at checkout, shown in your destination’s local currency. They are set by your country’s customs authority and paid to them — never to Omnitub. Prices shown outside the UK are net of UK VAT, which is zero-rated on export. HS code for customs: 39221000.

Returns — Key Points

Full details of our returns policy are available at omnitub.co.uk/policies/refund-policy. The following points are worth being aware of at the point of delivery:

30-day return window. Return requests must be raised within 30 calendar days from the delivery date via account.omnitub.co.uk. The tub does not need to be back with us within 30 days, but the request must be submitted within that window.
Items must be unused and in original packaging to qualify for a refund.
Returns must travel on a pallet. We do not accept returns via man-in-a-van or direct courier van services. If a tub is returned without a pallet, a 10% handling fee will be deducted from the refund value.
15% restocking fee applies to all domestic returns (orders placed on or after 25 September 2024). This covers the cost of unwrapping, unpalletising, checking and retesting the tub so it can return to stock.
Whirlpool baths and tubs with lighting are bespoke orders and are non-returnable.
Returns are accepted at our Somerset address Monday to Friday, 08:00–13:00 only.

All shipments are fully insured in transit. Omnitub Ltd cannot be held liable for delays caused by the transport carrier. UK mainland delivery is inclusive of VAT. All other shipping is chargeable and quoted exclusive of local taxes and import duties. HS code for customs purposes: 39221000. Last updated April 2026.

Insulation Solutions

Designed for Indoor, Outdoor, Commercial & Recirculation

Choose your thermal build — rigid PIR insulation from 25 mm to 150 mm, with 50 mm as standard. Taped, bonded, over-laminated and sealed with our Omnicoat finish, so the whole build holds heat as one continuous shell.

150 mm available From 25 mm to 150 mm — 50 mm is our standard
0.13 W/m²K wall Wall U-value at 150 mm vs 3.0 bare — near-passive
80 % longer heat Held at 50 mm vs a bare build — and a smaller chiller or heater

Choose your thermal build

Insulation is specified by thickness — from 25 mm to 150 mm, with 50 mm as standard. The thicker the board, the lower the heat loss and the smaller the chiller or heater you need. Thicknesses can be mixed across a single build where the project calls for it.

More than a board — a sealed thermal shell

It isn’t just the insulation. The board is taped, bonded into the tub, over-laminated with further layers of glass and resin, rolled, then sealed with Omnicoat — our final, sealed-in coat. The result is one continuous, gap-free shell with no thermal bridging, so the insulation performs at its full value and the whole build works as a single unit. Colour runs all the way through the Omnigel beneath it — never painted on.

Thermal performance by thickness — wall U-value of the finished, Omnicoat-sealed build (lower is better; bare build ≈ 3.0).
Thickness	Board R-valuem²K/W	Wall U-valueW/m²K	Best suited to
Bare build	—	3.0	Indoor domestic use — already outperforms acrylic & steel
25 mm	1.10	0.58	Light outdoor & shoulder-season knock-back
50 mm Standard	2.25	0.35	Most projects — holds heat for hours, balanced cost
75 mm	3.40	0.25	Cold-climate outdoor & light commercial
100 mm	4.50	0.19	Year-round outdoor & high-use commercial
120 mm	5.65	0.16	Demanding commercial & continuous recirculation
150 mm	6.80	0.13	Near-passive — maximum heat retention

Figures are for the finished, sealed build (board R plus the over-laminated, Omnicoat-sealed shell). A lower U-value means less heat lost — and a smaller, cheaper-to-run system holding it. Want the numbers for your exact tub, water temperature and climate? The OmniSoak calculator models it live.

Additional insulation walkthrough — up to 13 layers, finished with a fully sealed exterior coating.

Where it earns its keep

Indoor

Optional on standard installs — our 7-layer build already outperforms acrylic and steel for regular bathroom use.
Most demand
Outdoor & cold plunge

Protects against the temperature delta between your water and the surroundings — prevents condensation, holds heat, survives winters.
Commercial

Hotels, spas, glamping, wellness facilities — additional insulation reduces equipment workload and running costs.
Recirculation & filtration

Tubs paired with chillers, plant rooms or filtration units — extra insulation protects both the tub and the system around it.

Insulation on an Omnitub is specified by thickness — rigid PIR board from 25 mm up to 150 mm, with 50 mm as our standard. The thicker the board, the lower the heat loss, and the smaller the chiller or heater needed to hold temperature.

It is not just the board. The insulation is taped, bonded into the tub, over-laminated with further layers of glass and resin, rolled, then sealed with Omnicoat — our final, sealed-in coat. The result is one continuous, gap-free shell with no thermal bridging, so the insulation performs at its full value and the whole build behaves as a single unit. Colour runs all the way through the Omnigel beneath — it is never painted on.

The most popular choice is 50 mm, which holds water temperature far longer than a bare build — a build that already outperforms acrylic, steel, and most other bath materials on the market. Step up to 100 mm or 150 mm for year-round outdoor use, high-demand commercial settings, or continuous recirculation, and the wall U-value falls towards near-passive levels.

Heavier insulation reduces the workload and running costs of your equipment and prevents condensation caused by the temperature difference between the water and its surroundings — whether that is a garden cold plunge, a spa hot soak with plant-room recirculation, or a commercial wellness facility. It protects both the tub and the system connected to it.

Some customers add insulation to indoor installations too, and we are happy to accommodate that — though it is not necessary for standard indoor domestic use, hot or cold. Our standard build is more than sufficient for a regular bathroom.

Available on any tub in our range, in any colour. Thicknesses can be mixed across a single build where a project calls for it. Pricing is on application, based on your project.

Pricing on application

Spec your insulation in one call.

Available on any tub in our range. Tell us your project conditions — we’ll spec the right thickness, walk you through pricing, and confirm the build slot before you commit a penny.

Insulation thickness recommendation (25mm — 100mm+)
Project pricing with no commitment
Build-slot confirmed before payment
Direct line to the maker — not a call centre

WhatsApp the team Email an enquiry

Bespoke · made to order

Want it made bespoke?

Can’t find your exact size? We make baths, shower trays and ice baths to order by hand in Somerset — virtually any size, shape and colour, one piece or a hundred.

Frequently asked about this Omnitub

Asked by real customers about this product — from calls, video calls and emails.

Ask about this product

Type your question and we'll surface matching answers from real customer enquiries about Omnitub products.

What are Omnitub shower trays made from?

215×

asked

One of our most-asked questions

From 215 real customer enquiries across calls, video calls and emails.

Our shower trays are made from exactly the same material as our baths — our proprietary Omnigel built-up system, handmade here in Britain. It's a multi-layer construction with a hard-wearing, hand-polished surface over a strong, rigid structural body, giving you a tray that's beautifully finished, genuinely durable and built to last.

Because it's the same Omnigel system, your tray shares all the advantages of an Omnitub bath: it can be made in any colour — with the colour running all the way through the material rather than sitting on the surface — it has a non-slip surface as standard, and it's covered by our 30-year warranty.

The result is a shower tray that looks immaculate, feels reassuringly solid underfoot, and is made to perform for decades. And if you'd like it to match your bath or your wider bathroom scheme, just let us know — we make them in any colour you like.

Will my Omnitub fit through my doorway?

206×

asked

One of our most-asked questions

From 206 real customer enquiries across calls, video calls and emails.

Almost always, yes — and it's one of the best things about an Omnitub. Because it's far lighter than a traditional cast-iron or stone bath, it can be carried tilted or turned on its side during installation, so the measurement that really matters is the tub's depth rather than its full width. That means most of our baths pass comfortably through a standard interior doorway, even when the bath is wider than the door opening.

The key thing is to check the narrowest point along the whole route — the doorway itself, but also any tight hallway turns, stair landings or low ceilings. If the narrowest point is clear, you're good to go.

Not sure? Our "Will it fit?" checker makes it effortless — just snap a photo of your door or hallway and it'll estimate the clearance and tell you exactly which Omnitubs can pass through. And you're always welcome to send us your measurements and we'll happily confirm it for you.

Do you drop the Omnitub into a pre-built frame during installation?

113×

asked

One of our most-asked questions

From 113 real customer enquiries across calls, video calls and emails.

Yes — that's the typical way an Omnitub is fitted. Your installer builds a simple supporting frame or plinth to the right height, and the bath sits neatly within it, ready to be tiled or panelled around for a clean, built-in finish. Because an Omnitub is far lighter than a cast-iron or stone bath, it's much easier to position and level during this stage.

If you'd prefer a freestanding look, every one of our non-seated tubs comes with a feet kit as standard, so you can stand it on its feet instead. Our seated tubs are designed to be built in and don't include feet, as they're made to sit within a supporting frame.

Whichever route you take, we're always happy to talk your fitter through the best approach for your specific bath and bathroom.

How much is the 1500 round seated soaking tub?

100×

asked

One of our most-asked questions

From 100 real customer enquiries across calls, video calls and emails.

Our 1500 round seated soaking tub is £3,295 in our standard white, or £3,645 in any colour from our full range. The colour is a single flat price whatever shade you choose — matched and run right through the Omnigel, not painted on — so a bold colour costs no more than a subtle one. You'll always find the current price, and can choose your finish, on its product page.

Does a coloured Omnitub cost more than a white one, and how does delivery work?

98×

asked

A very popular question

From 98 real customer enquiries across calls, video calls and emails.

Colour is a fixed addition to the white price, shown on the product page as you select it:

Baths, shower trays and basins: +£350
Bath panels: +£300

Your colour is made to a RAL reference (or matched from a sample for shades outside the standard ranges) and carried right through the Omnigel, so it's permanent and consistent for life.

Delivery works exactly as it does for a white Omnitub — you simply add 14 working days for the colour to be made. At checkout you can:

choose any delivery date that suits you, now or in the future, at no extra cost; or
place your order on hold and confirm your delivery date later, when you're ready.

You're never tied to a fixed timescale — order whenever you like and take delivery exactly when it suits your project. The only difference from a white tub is the 14 working days we need to create your colour.

What is an Omnitub made from?

90×

asked

A very popular question

From 90 real customer enquiries across calls, video calls and emails.

Every Omnitub is handmade in Britain from Omnigel — our own proprietary built-up material system, developed specifically for deep, comfortable soaking baths that last a lifetime.

Rather than being formed in one thin layer like a standard acrylic or pressed-steel bath, an Omnitub is built up through multiple bonded layers: a hard-wearing, hand-polished surface over a strong, rigid structural body. It's a 7-layer built-up system as standard — and up to 13 layers with our insulation upgrade — and that construction is what gives an Omnitub its standout qualities:

Warm to the touch, and excellent at holding the heat of your soak
Strong and rigid underfoot, yet a fraction of the weight of cast iron or stone
Colour right through the material — never a surface coating — so it won't chip or wear away to reveal anything beneath
Backed by our 30-year warranty

You can see the full story of how Omnigel is built up, layer by layer, on our Omnigel page — and whatever size or colour you choose, it's made from exactly the same premium material throughout.

See all 159 FAQs →

See it for yourself

Book a viewing — in person or on video.

Tubs you can sit in, layers you can touch, colours you can hold against the light. Or, if you can’t make it to Somerset, a one-to-one video walkthrough with the team.

In person

Visit the showroom

Sit in the tub. Compare depths. Test the surface temperature. Hold our 430+ colour samples against your own paint or tile. 30-45 minutes, by appointment only.

Where: Unit 6 Works 22, Bennett Road, Highbridge, TA9 4PW
When: Monday — Friday, by appointment
Cost: Free

Worldwide

On video

Video walkthrough

A live tour of the workshop, the colours, the build process, and your specific spec — over WhatsApp or Google Meet. We’ll point the camera anywhere you need.

Where: WhatsApp · Google Meet · Zoom (your pick)
When: Pick a slot that suits you — we're flexible
Cost: Free

What to expect

Pick a slot
Use the calendar below to pick a date + time that suits — slots refresh in real time.
We confirm
Confirmation email lands instantly. We’ll WhatsApp you the day before to check what you want to focus on.
You arrive (or join)
Maker-led tour, ~30 minutes, no sales pressure. Bring your spec sheet, your tile sample, your installer’s questions.

Pick your slot

Live availability — slots refresh every minute. Reschedule any time via the email confirmation.

Why Omnitub?

Six reasons people choose us, once.

Handmade in Somerset. Engineered to last decades. Available in any colour, for any room, in any climate.

Handmade
Handmade Deep Soaking Bath Tubs
Handmade in Somerset using the finest materials ensuring we can stand behind our 30 year Manufacturers Warranty.
600mm soak
Soaking Depth Up to 600mm | 23.62 Inches
When we describe our tubs as deep soaking we mean it. Your search has ended. Relax. (Non Seated Tub Depth).
worldwide
Worldwide Shipping — Road, Sea & Air
UK delivery via Palletways. International shipping to 220+ countries with live rates at checkout. Sea freight available on request for larger orders.
Indoor, Outdoor or Commercial Use
Bathrooms, Tub Rooms, Gardens, Hotels, Airbnb, Glamping, Rentals, Retreats, Health Clubs, Gyms and more.
Suitable With Or Without A Shower System
An Omnitub® is great to use with a shower. The solid, sturdy base delivers an amazing experience.
430+ colours
Any Colour Is Possible with Omnitub®
Not everyone wants a white tub. We've over 430 standard colours and even offer a colour match service.

Why Omnitub

The Omnitub Advantage

Innovation, sustainability, and safety in every soak.

At Omnitub Ltd, we don’t just manufacture bath tubs—we create an experience. Every Omnitub Deep Soaking Bath Tub is meticulously handcrafted in the UK using our exclusive Omnigel material, a cutting-edge built-up system developed for superior durability, comfort, and environmental responsibility. Unlike mass-produced bath tubs made by machines, each Omnitub is carefully crafted by skilled professionals, ensuring exceptional quality, strength, and attention to detail in every piece.

Unlike conventional bath tubs, Omnitub Deep Soaking Bath Tubs are not built using standard acrylic sheets. Instead, we use Omnigel, a proprietary blend of high-performance resins and advanced protective agents, making our tubs stronger, safer, and far more luxurious.

Handcrafted in the UK with Sustainability in Mind

Sustainability is at the heart of everything we do at Omnitub. Unlike mass-produced bath tubs that rely on heavy industrial processing, each Omnitub Deep Soaking Bath Tub is carefully handmade, reducing unnecessary waste and emissions associated with large-scale factory production.
Omnigel is an environmentally responsible material, formulated to reduce environmental impact while offering unmatched strength and longevity. Unlike conventional plastics or lower-grade acrylics, Omnigel is designed to withstand the test of time, ensuring that every Omnitub Deep Soaking Bath Tub remains as durable and beautiful decades from now as it is on day one.
Additionally, because Omnitub Deep Soaking Bath Tubs are built to last, they reduce the need for frequent replacements—lowering landfill waste and making them a truly sustainable choice for homeowners who care about the planet.
Omnigel: Naturally Warm to the Touch for Ultimate Comfort

One of the standout benefits of Omnigel is its naturally warm-to-the-touch surface. Unlike traditional materials such as steel or acrylic, which can feel cold and uncomfortable, Omnigel retains warmth, providing an inviting and luxurious bathing experience from the moment you step in.
This unique heat-retaining property ensures that bath water stays warmer for longer, allowing you to indulge in deep relaxation without needing to constantly top up with hot water. This not only enhances comfort but also helps to reduce water and energy consumption, making Omnitub Deep Soaking Bath Tubs both luxurious and eco-friendly.
Built for Safety: Naturally Non-Slip for Complete Confidence

Safety is a fundamental part of every Omnitub Deep Soaking Bath Tub, and Omnigel has been specially formulated to provide a naturally non-slip surface. Unlike many manufacturers who only offer slip-resistant coatings as an extra option, Omnitub Deep Soaking Bath Tubs come with anti-slip properties as standard.
The specially engineered texture of Omnigel enhances grip underfoot, reducing the risk of slipping while maintaining a smooth, comfortable feel. This makes Omnitub Deep Soaking Bath Tubs ideal for families, elderly users, or anyone seeking a safer bathing experience—without compromising on style or comfort.
Chapter 4 of 6
Exceptional Strength, Durability & Protection
Omnigel is far more robust than standard bath materials, making Omnitub Deep Soaking Bath Tubs stronger and longer-lasting. The surface of every tub is engineered to withstand daily use while maintaining its pristine, high-gloss finish.
- UV Resistant – Prevents fading and discolouration, ensuring your bath tub retains its luxurious appearance for decades.
- Waterproof & Chemical Resistant – Omnigel prevents water absorption, eliminating swelling or degradation while withstanding everyday cleaning products without damage.
- Scratch & Stain Resistant – Maintains a flawless finish even after years of use, offering both beauty and resilience.
30-Year Manufacturer’s Warranty for Complete Peace of Mind

At Omnitub Ltd, we stand by the quality of our handcrafted Omnitub Deep Soaking Bath Tubs. That’s why we offer a 30-year manufacturer’s warranty—a testament to our confidence in the durability, craftsmanship, and performance of every tub we produce.
When you choose Omnitub, you’re not just buying a bath tub—you’re investing in a product built to last for decades. Whether for personal indulgence or daily use by the whole family, your Omnitub Deep Soaking Bath Tub is designed to maintain its strength, beauty, and functionality for generations.
Chapter 6 of 6
Luxury That Lasts
Omnigel is not just a material—it’s a revolution in bath tub manufacturing. By combining luxury, sustainability, and safety, Omnitub Ltd has created a bathing experience unlike any other.
- Handmade in the UK by skilled craftsmen, not mass-produced by machines
- Naturally warm-to-the-touch for the ultimate comfort
- Naturally non-slip for maximum safety
- Eco-friendly and designed to last a lifetime
By choosing Omnitub Ltd, you’re investing in a beautifully crafted, high-performance Omnitub Deep Soaking Bath Tub, made with our proprietary Omnigel—delivering a perfect balance of innovation, sustainability, and everyday luxury.

Verified reviews

Real customers, real soaks

Independent reviews from people who actually own an Omnitub. Verified by Trustpilot.

Best bath we've ever had

From the first phone call through to delivery, Omnitub were incredible. The depth is everything they say — a proper soak that fills you up to the shoulders. Worth every penny.

Sarah W.Cotswolds

Verified
Genuinely handmade

You can tell this is built by hand. The finish is flawless, the colour exactly what we wanted, and the team kept us in the loop the whole way through manufacturing.

James P.Edinburgh

Verified
Holds heat for hours

We filled it once and were still warm two hours later. The Omnigel layers make a real difference — way better than the acrylic we replaced.

Priya R.Manchester

Verified
Outdoor cold plunge

Installed it as an outdoor plunge with extra insulation. Survived a Pennine winter and still looks brand new. The team's installation advice was spot on.

Tom L.Yorkshire

Verified
Bespoke colour match

We sent them a paint sample and they matched it perfectly. The bath ties in beautifully with our bathroom palette — couldn't have done it with any other manufacturer.

Eleanor B.London

Verified
Worth the wait

Coloured tub took the full two weeks they quoted, but the wait was worth it. Delivery was on the date we chose at checkout and the driver was excellent.

Mike C.Bristol

Verified
Best bath we've ever had

From the first phone call through to delivery, Omnitub were incredible. The depth is everything they say — a proper soak that fills you up to the shoulders. Worth every penny.

Sarah W.Cotswolds

Verified
Genuinely handmade

You can tell this is built by hand. The finish is flawless, the colour exactly what we wanted, and the team kept us in the loop the whole way through manufacturing.

James P.Edinburgh

Verified
Holds heat for hours

We filled it once and were still warm two hours later. The Omnigel layers make a real difference — way better than the acrylic we replaced.

Priya R.Manchester

Verified
Outdoor cold plunge

Installed it as an outdoor plunge with extra insulation. Survived a Pennine winter and still looks brand new. The team's installation advice was spot on.

Tom L.Yorkshire

Verified
Bespoke colour match

We sent them a paint sample and they matched it perfectly. The bath ties in beautifully with our bathroom palette — couldn't have done it with any other manufacturer.

Eleanor B.London

Verified
Worth the wait

Coloured tub took the full two weeks they quoted, but the wait was worth it. Delivery was on the date we chose at checkout and the driver was excellent.

Mike C.Bristol

Verified

From the workshop

The Omnitub journal

Builds, installs, colour stories, and notes from our Somerset workshop.

All articles

Push Down Waste With Overflow

Description

Push Down Bath Waste & Trap — With Overflow

Omnitub tested performance

Compatibility

Key features

Soaking depth & water level guidance

Want maximum potential depth instead?

One colour, head to toe.

Design this one, your way.

Specifications

Documents for this product

Helpful links

Lead times by product

White Omnitubs

Coloured Omnitubs

Click & Collect

Choose when you receive it

Immediate dispatch

Scheduled delivery

Hold order

Where we ship

UK Mainland — Free

International — live rates

Shipping & Delivery

Your Delivery Options

Despatch Times by Product Type

White Omnitubs

Coloured Omnitubs

Click & Collect — Somerset Workshop

UK Mainland — Free Delivery

Fastest Turnaround Schedule

Rescheduling

Kerbside Delivery

48-Hour Damage Reporting Window

Failed & Refused Deliveries

Channel Islands

Europe & Worldwide — Live Rates at Checkout

Returns — Key Points

Choose your thermal build

More than a board — a sealed thermal shell

Where it earns its keep

Indoor

Outdoor & cold plunge

Commercial

Recirculation & filtration

Spec your insulation in one call.

Frequently asked about this Omnitub

問 Ask about this product

特What are Omnitub shower trays made from?

特Will my Omnitub fit through my doorway?

特Do you drop the Omnitub into a pre-built frame during installation?

特How much is the 1500 round seated soaking tub?

著Does a coloured Omnitub cost more than a white one, and how does delivery work?

著What is an Omnitub made from?

Visit the showroom

Video walkthrough

What to expect

Pick your slot

Handmade Deep Soaking Bath Tubs

Soaking Depth Up to 600mm | 23.62 Inches

Worldwide Shipping — Road, Sea & Air

Indoor, Outdoor or Commercial Use

Suitable With Or Without A Shower System

Any Colour Is Possible with Omnitub®

Handcrafted in the UK with Sustainability in Mind

Omnigel: Naturally Warm to the Touch for Ultimate Comfort

Built for Safety: Naturally Non-Slip for Complete Confidence

Exceptional Strength, Durability & Protection

30-Year Manufacturer’s Warranty for Complete Peace of Mind

Luxury That Lasts

Best bath we've ever had

Genuinely handmade

Holds heat for hours

Outdoor cold plunge

Bespoke colour match

Worth the wait

How much water does a deep soaking bath actually use?

Omnigel vs acrylic, steel & stone: which bath holds heat and lasts?

Emerald, Brass & British Craft: How Forazzi Bathrooms Built a Boutique-Hotel Soak into a Compact Edinburgh Tenement

Ask about this product

What are Omnitub shower trays made from?

Will my Omnitub fit through my doorway?

Do you drop the Omnitub into a pre-built frame during installation?

How much is the 1500 round seated soaking tub?

Does a coloured Omnitub cost more than a white one, and how does delivery work?

What is an Omnitub made from?