from £1,295 £1,100.75 · made to order in Somerset
Brilliant white, or any RAL colour — cast into the Omnigel, never painted. Colour-matched tubs add around 10 business days.
INFORMATION! We would like to point out that colour representation on monitors is only an approximation of the actual RAL shades which are provided as painted samples. The cause of this is neither the quality of the available software nor hardware; this also applies to printouts of RAL colour representations.
The representation of RAL colours is made by courtesy of RAL gGmbH, 53229 Bonn. RAL COLOURS
Selected: Brilliant White · included
Where will the bath go? This sets whether the flange is trimmed to sit tight to a wall, and whether it takes a matching panel.
Tell us the setting first so the rest of the build fits it. A free-standing bath is finished all the way round. Against a wall, in a corner or in an alcove, the flange sits tight to the wall and can be trimmed, and the open sides take a matching panel.
A deep tub is unforgiving on the wrong waste — answer one question and we'll point you at the right one, colour-matched to your tub if you like.
This one choice decides almost everything — both are completely normal.
Bundled with its trap, hand-finished to match your tub, and covered by a 5-year warranty. Overflow wastes ship with 1300 mm hoses. Not sure? We do this every day — call 01934 751 200 or WhatsApp us.
Most customers don't trim — the full flange is the standard fit. But if your tub needs to sit tight against a wall, we can trim the flange back for you — £75 per cut. Tap the wall letters on your tub — we've turned it to a bird's-eye view — then set how much to take off each side.
The flange is the lip around the rim. Where the tub meets a wall you don't need the full flange, so we can trim it back to sit flush — leaving a structural minimum of 25 mm. Free-standing baths keep the full flange all round, so there's nothing to trim. Each cut is £75 and makes the tub bespoke — non-returnable once cut.
We can core your overflow and deck tap holes to order — £75 each — so there's nothing to measure or cut on site. Or leave them and drill on site with our guide.
Having us drill the overflow and taps is one less job on fitting day — cleanly cored on the bench and colour-matched. Either service makes the tub bespoke: non-returnable once drilled. Prefer to keep it standard and fully returnable? Choose ‘on site’ and your fitter cores it using our guide.
A made-to-measure panel boxes in your tub for a built-in look — colour-matched, supplied oversized so your fitter trims a clean line.
Panels are made for baths that sit against walls: a corner takes an L-shaped panel (pick the hand to match your room), an alcove takes a front or end panel. Give the visible length and height and the price builds live — Front from £200, L-shaped from £320, plus £80 per m², plus £275 for any colour. Free-standing and single-wall baths don't take a panel.
One last look before your basket. Change anything below — every other choice stays saved.