Why Omnitub

Established in 2004 after spending the previous summer in Japan, Omnitub was founded to deliver the first Japanese Style Deep Soaking Bath to the UK.

We're a family run business and are proud to be a part of the Made In Britain initiative.

Each Omnitub is manufactured in Somererset by hand and is truely unlike any other bath on the market.

We hand lay a GRP coating over the mould which we also manufacture ourselves in Somerset, then once dried begin reinforcing the Omnitub to give it the strength, structure and water temperature retention which is unmatched within the market.

Omnitub's are suitable for hot or cold soaks and have been placed in sporting facilities all over the World for ice bath purposes. We've seen a big rise in athletes choosing Omnitub for their training as it's multi purpose functions of being perfect for all water types.

Each Omnitub is 600mm in depth and has fixed 45mm feet attached to the base of the Omnitub, we also offer the ability to ship the Omnitub without these feet as some door ways are too narrorw to fit a 645mm (64.5cm) Omnitub through the doorway or hallway, we can then provide self tapping screws and the ability to place these feet on onced placed in the bathroom.

We have a fixed waste location on each Omnitub but can ship with or without an overflow or can place the overflow in a different location on the Omnitub for you, you just need to consider the distance from the overflow to the waste if you want your overflow in a different location. We do have a 1.3m pop up waste available if this is the case.

We also offer a trim down service, so if yor space is slightly under the size of one of the Omnitub's we can trim down up to 50mm of the 75mm flanges or up to 75mm of the 100mm flange. Just be cautious of the overflow access if you want to trim down the 100mm flange by 75mm, usually when we trim sides down where the overflow is being placed it is either on an Omnitub with no overflow or where the overflow waste is being sunk into the wall behind the Omnitub.

In late 2020, we introduced the Omnitub Configurator which provides the functionality to design your own Omnitub on our website. You can add Jet Whirlpools (water jets on the side of the Omnitub), Jet Spas (air jets at the base of the Omnitub), Chromotherapy Lighting (lighting placed on the side of the Omnitub) and much more. It's currently in stage one of its release and is being actively developed on.

We have tens of thousands of happy customers from all around the World and can not wait to see what you do with your Omnitub.

 

 

Deep Bath & Large Bath Manufacturers | Made in Britain

1050mm x 750mm x 600mm Japanese Deep Bath

Omnitub Solo

1050mm x 1050mm x 600mm Japanese Deep Bath

Omnitub Duo

1250mm x 750mm x 600mm Japanese Deep Bath

Omnitub Solo Plus

1250mm x 1050mm x 600mm Japanese Deep Bath

Omnitub Duo Plus

1150mm x 900mm x 600mm Japanese Deep Bath

Omnitub Solo Extra

1500mm x 800mm x 600mm Japanese Deep Bath

Omnitub Solo Ultra

1700mm x 750mm x 600mm Japanese Deep Bath

Omnitub Deluxe

1500mm x 1500mm x 600mm Japanese Deep Bath

Omnitub Duo Ultra

Deep Soaking Baths FAQs

The ultimate knowledge base for all your Japanese Deep Soaking Bath Tub Questions.

We're always adding to this list with an aim to be the number one resource on the web for any question answered on Japanese Deep Soaking Baths.

Missing something? Let us know with the form below and we'll be sure to answer it as soon as possible and add to this list.

Approximately 24 inches or 600mm to be precise. Many websites call their bath tubs deep soaking but they're far shallower in depth. Have you seen them? #NoteToSelf 400mm is not deep soaking, neither is 450mm 😂

Anything from 1050mm x 750mm x 600mm is going to be great for a deep soaking bath tub. Omnitub currently manufacture 8 different sized bath tubs that are available to be shipped Worldwide.

GRP coating with reinforced fibreglass is the way to go if you're working with a depth over 400mm.

Omnitub Delivery FAQs

You'd like to order an Omnitub but have questions regarding delivery?

Look no further...

Non jet orders shipped within the UK are currently at 4 working days.

Omnitub's ordered through the configurator are at around 25 working says currently (updated October 2020).

We do. We just haven't added it to the delivery system yet. Reach out and we'll add it for you :-)