How Do You Clean A Deep Soaking Bath?

Cleaning A Deep Soaking Whirlpool Tub.

Suitable Cleaning Products

DETTOL WIPES | FLASH | MR MUSCLE | CIF | WHIRLPOOL CLEANER

1

 Use DETTOL WIPE and start wiping the Omnitub all around the sides and the bottom of the tub. Watch the following video for a demonstration. 

CLICK HERE FOR STEP 1 VIDEO

 

2

Use FLASH or MR MUSCLE and spray onto the tub, take a cloth and wipe down the sides and bottom of the tub. Watch the following video for a demonstration.

CLICK HERE FOR STEP 2 VIDEO

 

3

Use either a showerhead and taps to rinse the tub with water. Make sure that all cleaning residue is rinsed down before finishing.

CLICK HERE FOR STEP 3 VIDEO

 

4

*For Jet Systems Owners*

Make sure that you fill your Omnitub with Hot or Cold water to the top of the Jets. If you have had a bath, you can use this water to clean the Jets with. Get Whirlpool Cleaner and measure 75ml into a jug and pour into the tub.

CLICK HERE FOR STEP 4 VIDEO

 

 

5 

Once you have poured in the Whirlpool Cleaner, simply turn on the Jets and leave it to work its Magic for 10 - 15 minutes. Once you have done this, drain the water 🙂

CLICK HERE FOR STEP 5 VIDEO

 

And that is how you clean your Omnitub Deep Soaking Whirlpool Bath Tub. 

Simple isn't it?

But ...

If you do have any further questions at all that would like to be answered, please feel free to email info@omnitub.co.uk alternatively call 01934 751 200